INCLUDES: two (2) FLEKS3D™ build plates, one (1) frame

FLEKS3D SYSTEM comes with 2 plates and one frame. The frame is attached to the print-bed with clips or double stick tape. The two plates fits snuggly in the frame during the printing and are easily interchanged when the print is completed. Sometimes it might require that the plate is taped town to the frame, depending on the geometry of the print.

SELF LEVELLING? Order a “PUCK” if you have it.

SIZING:
The ever expanding market of 3D printers has created multiple sizes and we can’t offer all sizes. The FLEKS3D can be either a bit smaller or a bit larger then your build plate. If its smaller, then the frame will be taped down instead of using provided clips. If its larger, ensure that there is enough room around it for your print head to travel. The frame is 10mm thick, hence some loss from the building size of your plate.

If you have a Delta, in this case a square peg can fit in a round hole, or rather, a square plate can be placed on top of a round print bed.

Anymore questions? refer to our support page (http://www.fleks3d.com/support/).